booster pump price gas supplier for safety valve calibration

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Company Advantages
1. Suncenter high pressure booster pump is designed under the guidance of skilled engineers with vast experience in this domain. It can be used for a broad variety of liquids, such as oil, water, and chemical
2. Due to its remarkable characteristics, the product is increasingly used in the market. This product features energy saving and environmental protection
3. booster pump price is made up of high-quality components. It has not only has extremely high heat exchange efficiency, but also has excellent temperature resistance and long service life.

Compressed Air Driven Liquid Gas Booster Pump-DGG/DGGD Series

SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter gas booster pump price supplier for safety valve calibration-1

DGG Series Liquid Gas Booster Pumps

Suncenter gas booster pump price supplier for safety valve calibration-2

◪ DGG Series Liquid Gas Booster Pumps  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92

DGGD Series Liquid Gas Pumps(Double acting)

Suncenter gas booster pump price supplier for safety valve calibration-3

◪ DGGD Series Liquid Gas Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	3-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13

Suncenter DLS Series liquid gas filling booster pump system

SUNCENTER- Liquid gas filling pump systems are compact and delicacy solution tailored to customer specific requirements with air driven pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven pump have to be equipped with the air control unit combined filter, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

Suncenter gas booster pump price supplier for safety valve calibration-4

DLS liquid gas booster system = liquid gas booster pump+ following valves, gages, and parts

Suncenter gas booster pump price supplier for safety valve calibration-5

The hottest selling- Model C cabinet picture

Suncenter gas booster pump price supplier for safety valve calibration-6

◪ The standard gas booster pumps system including following parts:
◪ Air –driven liquid N2O/CO2/NOVEC/Refrigerant gas booster pump
◪ Stainless steel (carbon steel) material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92

DLS-DGGD series Liquid gas booster system technical specification

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.00
DLS-DGGD6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	48.60
DLS-DGGD10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	30.61
DLS-DGGD16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DLS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30
DLS-DGGD40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	7.69
DLS-DGGD64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	4.94
DLS-DGGD80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	3.96
DLS-DGGD100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	3.13

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter booster pump will automatically start, keep the loop pressure constant
※ Applicable for various kinds of gas such as N2O/CO2/NOVEC/Refrigerant etc.
※ For liquid gas(liquid+gas mixture) cylinder transfer/filling/recovery
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. Our factory has expanded to larger scale with increasing needs for booster pump price from our customers.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd has great advantages in talent and research.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd will always be dedicated to excellence in our work. Check it!

l******n

has a quality inspection team composed of professionals who specialize in testing the quality and quality of booster pump price to ensure that booster pump price is of high quality and excellent quality.

o******k

The company has always adhered to fine management for many years, and strictly controls the quality of every important link such as product design, research and development, production, testing, and delivery to ensure that the booster pump price produced are all qualified products that meet national standards.

d******w

booster pump price The material is superior, the product is durable, and the design is generous, the appearance is classic, and the workmanship is fine, the details are in place, the finished product is not only good in quality, but also has a high-grade texture.

c******a

booster pump price In the whole production process, there are personnel to inspect, not only that, also has a testing department, which conducts re-inspection of various performance indicators before booster pump price leaves the factory to ensure that booster pump price meets the needs and expectations of customers.

r******f

has been operating in good faith for many years, and has accumulated rich industry experience in product development and manufacturing. The high pressure booster pump produced can meet the national CCC certification standards in terms of quality and performance.

b******v

We have a complete cost control system, and insist on strictly controlling the production cost of each link of booster pump price, so that the final production of booster pump price has a higher cost performance.

product_message

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى