stable liquid nitrogen pump supercritical equipment for pressurization

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Company Advantages
1. The processing of Suncenter high pressure booster pump involves several basic steps: plasticizing, mixing, calendering or extrusion, forming, punching, cutting, vulcanizing and deflashing. The speed of this product is infinitely variable
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd keep well informed about liquid nitrogen pump technical developments, new application and new products in the field. It has flexibility without the use of unloaders or bypass valves
3. This product is very resistant to stains. In the production process, it was treated with soil release finishing agent to improve its ability to handle stains. This product has a compact and robust design
4. The product has good elongation. It has been tested under the stress-strain condition to check whether it will break with the increasing tensile load. The product has reliable performance and simple access to the operation
5. This product has good washability. During the material processing, the fabric has been cleaned by machine so that the fabric does not shrink again. This product can be installed at any predetermined pressure

Compressed Air Driven Liquid Gas Booster Pump-DGG/DGGD Series

SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter stable liquid nitrogen pump equipment for pressurization-1

DGG Series Liquid Gas Booster Pumps

Suncenter stable liquid nitrogen pump equipment for pressurization-2

◪ DGG Series Liquid Gas Booster Pumps  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92

DGGD Series Liquid Gas Pumps(Double acting)

Suncenter stable liquid nitrogen pump equipment for pressurization-3

◪ DGGD Series Liquid Gas Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	3-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13

Suncenter DLS Series liquid gas filling booster pump system

SUNCENTER- Liquid gas filling pump systems are compact and delicacy solution tailored to customer specific requirements with air driven pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven pump have to be equipped with the air control unit combined filter, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

Suncenter stable liquid nitrogen pump equipment for pressurization-4

DLS liquid gas booster system = liquid gas booster pump+ following valves, gages, and parts

Suncenter stable liquid nitrogen pump equipment for pressurization-5

The hottest selling- Model C cabinet picture

Suncenter stable liquid nitrogen pump equipment for pressurization-6

◪ The standard gas booster pumps system including following parts:
◪ Air –driven liquid N2O/CO2/NOVEC/Refrigerant gas booster pump
◪ Stainless steel (carbon steel) material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92

DLS-DGGD series Liquid gas booster system technical specification

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.00
DLS-DGGD6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	48.60
DLS-DGGD10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	30.61
DLS-DGGD16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DLS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30
DLS-DGGD40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	7.69
DLS-DGGD64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	4.94
DLS-DGGD80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	3.96
DLS-DGGD100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	3.13

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter booster pump will automatically start, keep the loop pressure constant
※ Applicable for various kinds of gas such as N2O/CO2/NOVEC/Refrigerant etc.
※ For liquid gas(liquid+gas mixture) cylinder transfer/filling/recovery
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. liquid nitrogen pump is assembled by our highly skilled professionals.
2. From improving management thought and strategy, Suncenter will always upgrade the job efficiency. Inquiry!

r******f

liquid nitrogen pump Equipped with a water connection and a simple water inlet and outlet interface, the installation location can be flexibly selected according to different space layouts. The connection port and the water connection are tightly combined, and there will be no water leakage or seepage.

e******c

high pressure booster pump Carefully designed by professional designers, the design is novel and fashionable, the shape is exquisite and beautiful, the workmanship is fine, and the quality is high. It is a festival gift with both practicality and beauty.

w******s

liquid nitrogen pump It has a variety of power storage modes. Under the AC power mode, it can be directly plugged in for charging. The original battery is used for charging, and the standby time is longer, making it more convenient for you to use.

i******a

liquid nitrogen pump Made of high-quality high-strength corrugated paper, it has a firm structure, beautiful appearance, easy assembly and disassembly, can be used repeatedly, and meets the requirements of low-carbon environmental protection.

n******g

liquid nitrogen pump Excellent material selection, exquisite workmanship, advanced technology, stable operation, safe use, and reliable quality. It is a drinking water equipment with both aesthetics and functionality. You can buy and use it with confidence.

t******o

The company has established a rigorous production management system to strictly control the quality and production costs during the production process. Compared with other similar products, the high pressure booster pump produced has more advantages in terms of quality and price, and is more cost-effective.

رسالة المنتج

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى