high quality booster pump system co2 experts for pressurization

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Air Driven Liquid CO2 Booster Pump-DGG/DGGD Series.

SUNCENTER pumps are air driven at a drive air pressure of 2bar to 8bar by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter co2 booster pump system experts for pressurization-1

DGG Series Liquid CO2 Booster Pumps(Single acting)

Suncenter co2 booster pump system experts for pressurization-2

◪ DGG Series Liquid CO2 Booster Pumps(Single acting)  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14

DGGD Series Liquid CO2 Pumps(Double acting)

Suncenter co2 booster pump system experts for pressurization-3

◪ DGGD Series Liquid CO2 Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81

Suncenter co2 booster pump system experts for pressurization-4

◪ Liquid carbon dioxide booster pump and pressurization equipment, commonly used in carbon dioxide supercritical extraction of various plant extracts, material foaming, and carbon dioxide fire extinguisher filling. Among them, carbon dioxide extraction is often used in biopharmaceuticals. Experimental research works by using a special pump for liquid carbon dioxide to pressurize carbon dioxide to a supercritical state, which is used to decompose various elements in plants for easy extraction.

DGGD series liquid CO2 pump working picture

Suncenter co2 booster pump system experts for pressurization-5

◪ DGGD series liquid CO2 pump working picture

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof 
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable for liquid CO2/liquid+gas mixed CO2/Supercritical CO2
※ For liquid CO2 cylinder transfer/filling
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

p******n

. Since its establishment, the company has always adhered to the business tenet of "establishing business with science and technology, standardizing management, seeking efficiency, and keeping promises". We sincerely welcome customers from all over the world and from home and abroad to negotiate and order.

o******i

Introducing and learning foreign advanced technology and experience, combined with the company's own situation, developed a set of quality management system of its own, not only that, we also have multiple assembly lines for simultaneous production to ensure high pressure booster pump high quality At the same time, the output is also high.

c******q

We have a professional production management team, an independent production and processing workshop and advanced production technology, providing strong support and guarantee for the production of high pressure booster pump with reasonable structure, excellent performance, safety and reliability.

t******h

The high pressure booster pump manufactured by us with advanced design concepts not only strives for excellence in workmanship, scientific and reasonable design, but also has stable performance and durability, which can meet customers' needs for high-quality products.

b******c

Introduce and learn from foreign advanced production methods, improve it in combination with its own conditions, develop a production method that is both in line with the company's conditions and efficient, and apply it to the production of booster pump system, so that booster pump system not only has high output, Moreover, it is durable, has a long service life, and has a certain quality guarantee.

a******e

The product has passed the electro-static discharge test (ESD), meaning it has a protection system to withstand instantaneous high current. The product has a compact structure with all seams finely sewed

product_message

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى