Pneumatic Liquid Pump DGGD series

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Enterprise Strength

With a comprehensive service guarantee system, Suncenter Fluid Control Equipment is committed to providing sound, efficient and professional services. We strive to achieve win-win cooperation with customers.

Application Scope

The booster pumps produced by Suncenter Fluid Control Equipment has a wide range of applications.With a focus on customers' potential needs, Suncenter Fluid Control Equipment has the ability to provide one-stop solutions.

Company Advantages
1. Suncenter air driven hydraulic pump is made of high-quality materials selected from reliable and internationally-certified suppliers.
2. air driven hydraulic pump has some outstanding advantages, such as high pressure pneumatic pump .
3. This product will reduce the need for the workforce for its highly advanced system. It will directly cut down labor costs.

Compressed Air Driven Liquid Booster Pump-DGGD Series

We offer the most complete range of Air driven liquid pump models in the industry measured for:

Capability of ultimate pressure, flow or output horsepower.

Suncenter pneumatic air driven hydraulic pump marketing for machinery-1

Compatibility with a broad variety of liquids, such as oil, water and chemical applications.

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Suncenter pneumatic air driven hydraulic pump marketing for machinery-2

DGGD Series Liquid Pumps(Double acting, single air drive head)

Suncenter pneumatic air driven hydraulic pump marketing for machinery-3

◪ They are characterized by the same features as the DGG pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81
DGGD255	255:1	2-8 bar	255XPL	2040	NPT1/4	M14*1.5	1.23
DGGD400	400:1	2-8 bar	400XPL	3200	NPT1/4	M14*1.5	0.79

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Pressures to 640Mpa (6400 bar)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has been focused on air driven hydraulic pump design, construction and service for decades.
2. Suncenter masters highly advantageous production technology.
3. The persistent goal of Suncenter is to provide comprehensive service for customers. Please contact. Dongguan Suncenter Fluid Control Equipment Co., Ltd strives to serve the best interests of our customers. Please contact.

a******n

Strictly control high pressure pneumatic pump each link of production and processing, and introduce foreign advanced technology, and further improve it to make it better in quality and more stable in performance. It is a high-quality product worth buying.

j******w

We insist on using advanced concepts and exquisite craftsmanship to process high pressure pneumatic pump, so that high pressure pneumatic pump not only has a reasonable structure, but also has excellent performance, both aesthetics and practicality, high quality, and can meet customers' high requirements demand for quality products.

d******c

As a professional high pressure pneumatic pump manufacturer, has rich production experience, advanced production equipment, superb production technology and strong production strength, capable of producing high-quality high pressure pneumatic pump.

o******d

Insist on excellence, not only manufacture high pressure pneumatic pump in strict accordance with industry standards, but also strive to do the best in every detail, so that the produced high pressure pneumatic pump can meet strict quality standards.

p******q

Always put product quality first, not only select high-quality raw materials and use advanced production technology to manufacture high pressure pneumatic pump, but also set up a professional quality inspection team to strictly monitor each production link and each production process, To ensure that the high pressure pneumatic pump produced are of high quality.

f******p

The company has established a rigorous production management system to strictly control the quality and production costs during the production process. Compared with other similar products, the high pressure pneumatic pump produced has more advantages in terms of quality and price, and is more cost-effective.

رسالة المنتج

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى