waterproof hydro pressure tester control type for factory

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Company Advantages
1. Suncenter safety valve test bench has a very scientific design. Humidity, temperature, carbon dioxide and light, as well as other factors such as rain, airflow or noise, are environmental concerns in design. The product has reliable performance and simple access to the operation
2. Due to its remarkable advantages in the market, the product enjoys a great market prospect. This product has the characteristics of explosion proof
3. It is thoroughly checked by the experts in order to ensure reliable performance without any flaws. It helps save costs and prevent contamination
4. Multiple safety and quality tests are performed strictly to ensure a superior performance of the product. The speed of this product is infinitely variable
5. Our quality inspectors will inspect the product on various quality parameters before delivery to ensure it is in line with international standards. It requires no electrical or mechanical drive connections

Introduction

Suncenter control hydro pressure tester type for factory-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Suncenter control hydro pressure tester type for factory-2

Clamping seat

Suncenter control hydro pressure tester type for factory-3

Schematic diagram

Suncenter control hydro pressure tester type for factory-4

Instruction for software control part

Suncenter control hydro pressure tester type for factory-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Suncenter control hydro pressure tester type for factory-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Suncenter control hydro pressure tester type for factory-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Suncenter control hydro pressure tester type for factory-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Suncenter control hydro pressure tester type for factory-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Suncenter control hydro pressure tester type for factory-10

Suncenter control hydro pressure tester type for factory-11

Suncenter control hydro pressure tester type for factory-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. The quality of hydro pressure tester is highly recommended by customers.
2. Suncenter always emphasizes the importance of high quality service. Call!

y******y

After years of careful management, a set of scientific and rigorous production process has been established, and the quality is strictly controlled in all aspects of product design, production, quality inspection, and delivery. The safety valve test bench produced is fine in workmanship and high in quality , Strong practicability.

y******l

As a professional and responsible hydro pressure tester manufacturer, we always put product quality first, insist on using high-quality raw materials and advanced production technology to manufacture hydro pressure tester, and strictly control every production process to ensure that all hydro pressure tester are qualified Products, to bring reliable quality assurance to customers.

f******v

safety valve test bench From raw material selection, production to processing, there are professionals to conduct testing. Not only that, safety valve test bench After the production is completed, it will be inspected by relevant national departments to ensure that it meets international standards and is of high quality. , high-quality products of excellent quality.

q******c

The safety valve test bench manufactured by us with advanced design concepts not only strives for excellence in workmanship, scientific and reasonable design, but also has stable performance and durability, which can meet customers' needs for high-quality products.

b******m

safety valve test bench The design is scientific and reasonable, the materials are exquisite, the workmanship is fine, durable, and the service life is long. It is a product of high quality and extraordinary quality.

l******u

Our skilled professionals supervise the quality control throughout the production, greatly guaranteeing the quality of the product. It produces little noise during its operation

رسالة المنتج

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى