hydrostatic pressure test | Safety valve test bench

latest_products

تعليمات اختبار الضغط اليدوي

مضخة اختبار ضغط هيدروليكي / هيدروليكي / هيدروساتي

اسطوانة الغاز آلة اختبار القياس الخارجي مع سترات المياه

مضخة حقن الكيكات الكيميائية الهوائية

معلومات المنتج
ردود الفعل

Application Scope

The booster pumps produced by Suncenter Fluid Control Equipment is of high quality and is widely used in the industry.Suncenter Fluid Control Equipment insists on providing customers with reasonable solutions according to their actual needs.

Company Advantages
1. Suncenter hydro pressure test pump is made of quality-approved raw materials.
2. The product has high reliability, good performance and low cost.
3. The outstanding feature of this product lies in its high performance. The performance of the product is based on the needs of the customers in the industry.
4. Maintaining this product is an easy and time-saving job for people. They just need to regularly wipe the dust and check whether the electric cords are in good condition or not.

Introduction

Safety valve test bench SVT40-DN400-CC computer control model-1

◪ The safety valve test bench is a new type of pressure test device developed by our company for reference to GB/T 12242-2005 (pressure release device and performance test specification), which is used to adjust and test the setting pressure of the safety valve.

Function and features

Safety valve test bench is used for various safety valve setting pressure adjustment, the whole set pressure detection, discharge pressure detection, back seat pressure testing, assessment of its pressure safety performance etc.. ,

◪ A. pressure range: 0-480 bar for option(gas pressure and water pressure)
◪ B. test medium: air, nitrogen, water;
◪ C. test valve diameter: DN15-DN400 for option
◪ D. pressure control accuracy: less than 1%F.S;
◪ E. pressure measurement accuracy: 0.4 pressure gauge (optional higher pressure level);

◪ F. Clamping way: hydraulic cylinder clamping;
◪ G. station interface type: screw and flange type
◪ H. clamping force output range: 0-50 tons;
◪ I. supply voltage: 50Hz -60Hz ,220V/380V for option
◪ J.Size：1500×1200×900mm(machine) +1500×800×800mm(clamping device)

Control panel

Safety valve test bench SVT40-DN400-CC computer control model-2

Clamping seat

Safety valve test bench SVT40-DN400-CC computer control model-3

Schematic diagram

Safety valve test bench SVT40-DN400-CC computer control model-4

Instruction for software control part

Safety valve test bench SVT40-DN400-CC computer control model-5

◪ Figure 1
◪ The first step: start the computer and double click the boot program, as shown in Figure 1.
◪ The second step: after the program, enter the main interface of the program.

Safety valve test bench SVT40-DN400-CC computer control model-6

◪ In the main interface, select the appropriate sensor, and pay attention to the selection of the sensor not to exceed the 2/3. of the measuring process ,as shown in Figure3

Safety valve test bench SVT40-DN400-CC computer control model-7

◪ In the main interface, choose water pressure test or air pressure test. As shown in Figure 4.

Safety valve test bench SVT40-DN400-CC computer control model-8

◪ After selecting the pressure or water pressure test, click the menu bar test information to set the options. As shown in Figure 5.

Safety valve test bench SVT40-DN400-CC computer control model-9

◪ Display the dialog box for the test information, as shown in Figure6

With printer,could print the testing report directly.

Safety valve test bench SVT40-DN400-CC computer control model-10

Safety valve test bench SVT40-DN400-CC computer control model-11

Safety valve test bench SVT40-DN400-CC computer control model-12

◪ Safety valve test bench SVT40-DN400-CC computer control model

video

Company Features
1. After years of evolvement, Dongguan Suncenter Fluid Control Equipment Co., Ltd has finally defeated many other competitors and stood out in the markets relying on the ability in manufacturing hydro pressure test pump .
2. The complete modern management system is available in Dongguan Suncenter Fluid Control Equipment Co., Ltd's manufacturing plant.
3. We continuously enhance our practices in sustainability. We reduce CO2 emissions and the use of natural resources as well as improve energy and water efficiency. Our goal is to help customers get the perfect product in the most cost effective way. This means helping them choose the right material, the right design and the right machine for their specific application. Inquire online!

a******w

Suncenter hydro pressure test pump is made of fully checked raw materials. The product includes a mix of synthetic fibers for ultimate softness

t******p

Suncenter hydrostatic pressure test is the one you should never miss as it is with practical and aesthetically-pleasing design. This product has received rave reviews from many make-up artists

s******l

hydrostatic pressure test manufacture adheres to the standard process operation. It is suitable for both professional makeup artists and beginners

a******t

Suncenter hydrostatic pressure test is manufactured with 5S standard production process. Its brush is fluffy yet features high density

b******p

The production Suncenter hydrostatic pressure test is efficient enough to meet your manufacturing needs, no matter the scale of production. The product can be applied to liquids, powders, and creams

i******t

The product features a clean appearance. It is coated with a special layer to effectively prevent adhesion of dust or oil smoke when being placed. The brush of this product is not prone to shed or break

product_message

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى