Pneumatic Liquid Pump DGGD series

Company Advantages
1. The materials Suncenter air over hydraulic pump uses have been well selected and strictly tested. The speed of this product is infinitely variable
2. Some of our clients say they are willing to recommend this energy-efficient product to partners. It really contributes to cut electricity costs. The product can be mounted in any position
3. The product is able to negotiate the space. It has the ability to single-handedly transform a large area into multiple smaller spaces with minimal effort within a few moments. The speed of this product can be adjusted steplessly
4. The product features high efficiency. It is able to perform tasks at a high speed and is capable of delivering results within short periods of time. It requires no electrical or mechanical drive connections

We offer the most complete range of Air driven liquid pump models in the industry measured for:

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Company Features
1. Under the stringent excellent control and professional management method of air over hydraulic pump , Dongguan Suncenter Fluid Control Equipment Co., Ltd has grown into an internationally famous brand.
2. We are scaling our company to increase market share in overseas markets. We learn from some successful peers in terms of marketing strategies, introduced technologies, and workmanship handling. By doing this, our profits soar recently.
3. Dongguan Suncenter Fluid Control Equipment Co., Ltd will always be dedicated to excellence in our work. Ask online!