المنتجات ذات الصلة
FM-200(HFC-227ea)/ NOVEC automatic filling machine
Machine Composition
DGS-FM-5A model filling machine including air-driven gas filling pump, precision pressure gauge, pressure reducing valve, high pressure electromagnetic valve, electric control part, and electronic scale, vacuum pump, etc.
Machine characteristics
DGS-FM-5A model filling machine using the compressed air as power source, Through the Suncenter air driven gas booster and filling pump, driving the FM200/NOVEC filling and conveying, when the transmission weight reaches a certain value, the sensor signal is transferred to the gas electromagnetic valve, the driven air will stop automaticlly,and pump stops working.
Then Connecting the nitrogen gas source, open the high-pressure nitrogen gas valve and start the injection of nitrogen; when precision pressure gauge shows the needed nitrogen pressure then close the nitrogen valve; filling finished; It has the characteristics of small volume, light weight, simple operation, reliable performance. Especially suitable for the filling of FM-200/NOVEC in fire fighting industry.
◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
video
Aerosol filling machine, in the design of the contents will be semi-automatic filling machine, semi-automatic sealing machine, semi-automatic filling machine propellant (including booster pump) combined with the completion of a work platform, and can be any single work. Any two machine interaction work, can be adjusted.
Contents of various liquid filling machine for filling medium has good self-priming function. Contains a certain viscosity and concentration of media (such as paints, polyurethane foam sealant for black and white material); semi-automatic sealing machine sealing quality and reliable, and easy to install, larger cylinder seal, the gas pressure 0.25-0.3MPa when the source can also be sealed ; semi-automatic filling machine mainly used for propellant
In the filling (c butane gas, Freon, dimethyl ether and 134a, etc.) no corrosion can be liquefied. Main seals are imported. Applicable to all kinds of aerosol filling valve. Booster pump with large capacity two-way booster. So filling fast, accurate.
The machine small footprint, simple operation. A worker can only complete the whole process of production (labor intensity of production with other domestic manufacturers of semi-automatic sealing machine operator rather), is the preferred aerosol manufacturers.
The design of this machine, all the pneumatic valves are used the national standard pneumatic valves, and all the open design, easy to replace, easy to buy.
For valves: 1 " (25.4 mm)
Contents of the filling volume (ml): 20,50,100,200,400,600,750
Contents of the input connector: 20 mm diameter stainless steel pagoda connector
Propellant filling volume (ml): 20,50,100,200,400,600
Propellant input connector: M22 * 1.5 Anti-teeth (for example, with standard 15KG, 50KG liquefied petroleum gas cylinder butt)
Filling accuracy: ± 1%
Aerosol cans for height (mm): 70-330
For aerosol can diameter Diameter (mm):: φ35 to φ65
Working pressure (MPa): 0.5-1.0
Maximum Air Consumption (m3/min): 1
Production capacity (cans / hour): 100 ml per tank filling of liquid propellant calculations, 1200 cans / hour
Packing size and weight (of 2): 1000 mm * 590 mm * 1560 mm, 190 kg; 440 mm * 340 mm * 825 mm, 40 kg
Aerosol filling machine, in the design of the contents will be semi-automatic filling machine, semi-automatic sealing machine, semi-automatic filling machine propellant (including booster pump) combined with the completion of a work platform, and can be any single work. Any two machine interaction work, can be adjusted.
Contents of various liquid filling machine for filling medium has good self-priming function. Contains a certain viscosity and concentration of media (such as paints, polyurethane foam sealant for black and white material); semi-automatic sealing machine sealing quality and reliable, and easy to install, larger cylinder seal, the gas pressure 0.25-0.3MPa when the source can also be sealed ; semi-automatic filling machine mainly used for propellant
In the filling (c butane gas, Freon, dimethyl ether and 134a, etc.) no corrosion can be liquefied. Main seals are imported. Applicable to all kinds of aerosol filling valve. Booster pump with large capacity two-way booster. So filling fast, accurate.
The machine small footprint, simple operation. A worker can only complete the whole process of production (labor intensity of production with other domestic manufacturers of semi-automatic sealing machine operator rather), is the preferred aerosol manufacturers.
The design of this machine, all the pneumatic valves are used the national standard pneumatic valves, and all the open design, easy to replace, easy to buy.
For valves: 1 " (25.4 mm)
Contents of the filling volume (ml): 20,50,100,200,400,600,750
Contents of the input connector: 20 mm diameter stainless steel pagoda connector
Propellant filling volume (ml): 20,50,100,200,400,600
Propellant input connector: M22 * 1.5 Anti-teeth (for example, with standard 15KG, 50KG liquefied petroleum gas cylinder butt)
Filling accuracy: ± 1%
Aerosol cans for height (mm): 70-330
For aerosol can diameter Diameter (mm):: φ35 to φ65
Working pressure (MPa): 0.5-1.0
Maximum Air Consumption (m3/min): 1
Production capacity (cans / hour): 100 ml per tank filling of liquid propellant calculations, 1200 cans / hour
Packing size and weight (of 2): 1000 mm * 590 mm * 1560 mm, 190 kg; 440 mm * 340 mm * 825 mm, 40 kg
حقوق الطبع والنشر © 2018 Dongguan Suncenter Fluid Equipment Co.، Ltd. | كل الحقوق محفوظة
