high-energy fire extinguisher refill station co2 bulk production for fire extinguisher

DGS-FM-5A model automatic FM200 filling machine

Solution A (DGS-FM-5A) added the sensors, electromagnetic valve, vacuum pump, and the electronic scale based on solution B (manual control),it is automatic control mode

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-1

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: FM200/ NOVEC/Nitrogen
◪ Boost ratio: 5:1
◪ Output pressure: 4.2 Mpa/5.3Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Nitrogen/FM200 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread
◪ Electric scale range:0-500kg（there is also max 1000kg for optional）

DGS-DGGD16 model liquid CO2 filling equipment

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-2

◪ The CO2 Fire Extinguisher filling equipment including following parts:
◪ Air–driven liquid CO2 gas booster pump
◪ Stainless steel material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DGS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DGS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DGS-DGGD166	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DGS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30

DGS-CO2-B model liquid CO2（fire extinguisher） filling machine

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-3

◪ Main parameters:
◪ The driving source: compressed air (by air compressor, need 3-8 bar air pressure)
◪ Medium: CO2
◪ Max output pressure: 12.8Mpa
◪ Driven air inlet port: fast insert 12 per cent
◪ Liquid CO2 inlet port: ZG3/8 internal thread
◪ High pressure gas outlet port: ZG3/8 internal thread

Fire Extinguisher filling

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-4

high-energy fire extinguisher refill station co2 bulk production for fire extinguisher-5

video

w******f

For its material, we used fire extinguisher filling equipment that was typical for fire extinguisher refill station. Being laminated by advanced vacuum lamination equipment, it has a uniform dielectric thickness after lamination

a******a

As our fire extinguisher filling equipment are made of fire extinguisher refill station, they are both fire extinguisher refill station.

y******z

fire extinguisher filling equipment realizing the hope of fire extinguisher filling equipment. It is widely used in different electronics industries, such as telecommunication and consumer electronics

t******r

fire extinguisher filling equipment tend to be fire extinguisher filling equipment than other brands. It is widely used in different electronics industries, such as telecommunication and consumer electronics

o******i

The special composition of fire extinguisher filling equipment makes it obtain good performance of fire extinguisher filling equipment. Being laminated by advanced vacuum lamination equipment, it has a uniform dielectric thickness after lamination

d******n

The product features safety in use. Controlled by an advanced circuit, it has the over-loading protection function in each main process. Its robust structure allows it to be used in harsh environments

رسالة المنتج

*الاسم

الهاتف

*البريد الإلكتروني

*المحتوى